Choose your Pandora chain
First you choose the style of Pandora bracelet and the correct size. A good way to get the correct size is to measure your wrist and add 3cm for a more fitted bracelet or 4cm for a loose fitting bracelet. The bracelet must not be too tight, as there needs to be room for charms. A good rule of thumb is that you should be able to put a finger between your wrist and the bracelet.
Add clips to your bracelet
Then you chose your two clips which are needed to fasten over the two threaded sections on the bracelet thus allowing you to build up the separate sections. The Pandora charms can then be evenly spaced around the bracelet rather than all falling down to the bottom in a cluster.
We would suggest using two clips to begin with and adding a third when your bracelet is almost complete.
Add spacers to your chain
Spacers are smaller versions of the charms, and are used to frame your charms so your bracelet doesn't look too cluttered it also adds another dimension to the bracelet they come in silver, silver and gold, crystal and 14ct gold.
Adding a security chain
We would suggest only putting a security chain on when your bracelet is 2/3 full to keep it in place otherwise it may slide down your bracelet and may cause damage to the chain. Security chains add a great finishing touch to your bracelet!
Choose your charms and beads
Anything goes here, you can make your Pandora bracelet as detailed or as simple as you like, chose from a fabulous selection of silver, silver and gold, crystal, enamel, murano glass and 14ct gold. To create the look that you desire, attach your chosen beads by simply twisting each bead on to your bracelet. Continue twisting your beads through until you're satisfied with the look that you want to achieve.